Precision Machined Metal Sputtering Targets | High Purity Custom Titanium & Alloy
Precision machined metal sputtering targets and backing plates for thin-film deposition. RFQs should specify material, purity, target shape, dimensions, bonding requirement, surface finish, tolerance, quantity and inspection documents.
- DocumentsMTC and EN 10204 3.1 on request
- TraceabilityHeat number and inspection scope confirmed
- RFQ detailsGrade, standard, size, tolerance, quantity
- PackingExport protection by product form and length
Product Introduction
Titanium / alloyMaterial by process
Purity by RFQSpecified by buyer
Flatness / surfaceMachined to drawing
Clean packingReviewed before shipment
Acceptance is by the ordered specification. Final dimensions, tolerances, grade, inspection and documentation are confirmed by the drawing, purchase order and mill test certificate.
Product Parameters and RFQ Scope
| Item | RFQ Detail |
|---|---|
| Material | Titanium, zirconium, nickel alloy, molybdenum, tantalum or buyer-specified target material. |
| Purity | Specify the required purity level and impurity limits from the coating process or purchase specification. |
| Geometry | Round, rectangular, rotary or custom shape according to drawing. |
| Machining | OD, thickness, hole pattern, groove, chamfer, backing plate and tolerance should be defined by drawing. |
| Inspection | Dimensional report, surface inspection, material certificate, density or third-party inspection when required. |
Packaging and Documentation
Sputtering targets should be packed to protect machined surfaces, edges and identification labels. Depending on material and surface requirement, packing may include clean wrapping, vacuum packing, moisture protection, foam support and export cartons or wooden cases. Documents may include packing list, commercial invoice, material certificate and inspection report when requested.
FAQ
What information is needed for a sputtering target quotation?
Send material, purity, target dimensions, drawing, backing plate or bonding requirement, surface finish, quantity and inspection documents.
Can custom shapes be quoted?
Yes. Custom targets should be quoted from a drawing with dimensions, tolerances and installation details.
How should purity be specified?
Use the purity level and impurity limits required by the coating process or end customer specification. Avoid relying on a generic purity claim without acceptance criteria.
Application and Specification Review
Metal sputtering targets are used in PVD coating systems for thin-film production, decorative coating, optical coating, electronic components, solar-related coating and research equipment. The correct target specification depends on the coating system, target holder, power level, erosion track, bonding method and film purity requirement.
Beiyu quotes sputtering targets from the buyer's drawing and material specification. For titanium and titanium alloy targets, the RFQ should define grade, purity, dimensions, surface finish, backing plate or bonding requirement and inspection documents. For nickel, zirconium, molybdenum, tantalum or tungsten targets, include the required material designation and impurity limits instead of using only a generic material name.
Inspection and Acceptance
Typical acceptance items include dimensional inspection, surface check, material certificate, density requirement where applicable, backing-plate inspection and packing condition. If the target is for a semiconductor, optical or medical-related coating process, the buyer should provide impurity limits and acceptance criteria before quotation.
Procurement Checklist
- Target material, purity level and impurity limits.
- Target shape, OD, thickness, backing plate, bonding layer and tolerance drawing.
- Surface finish, cleaning requirement and packing requirement.
- Certificate, dimensional report, third-party inspection and quantity.
Additional Technical Notes
For repeat target orders, keep the previous drawing revision, target material, purity level and acceptance report together so the next RFQ uses the same baseline. If the target requires bonding to a backing plate, state bonding method, backing material, thermal cycling requirement and whether the buyer needs a separate bonding inspection record. For high-value or fragile targets, packing and handling instructions should be agreed before shipment.
Final RFQ Details
For export quotations, also confirm whether the target should be shipped as finished target only, target plus backing plate, or bonded assembly. If the buyer has previous inspection reports, include them with the new RFQ so purity, dimensions, surface finish and packing can be kept consistent across repeat orders.
Common applications
Review fabrication and machining support22
Ti
Titanium
PVD coating equipmentConfirm medium, temperature, drawing tolerance, inspection and documentation scope before quotation.Research and production sputtering systemsConfirm medium, temperature, drawing tolerance, inspection and documentation scope before quotation.Custom target replacementConfirm medium, temperature, drawing tolerance, inspection and documentation scope before quotation.Precision machined titanium and alloy discsConfirm medium, temperature, drawing tolerance, inspection and documentation scope before quotation.
Compare related titanium components
Precision machined parts categoryProduct
Material
Reference
RFQ focus
Titanium Precision Machined Parts
Gr2 / Gr5 / Gr7 / Gr12 / Gr23
Drawing
Custom CNC parts
>
Grade 2 Titanium Tube Sheet
Grade 2
Drawing
Drilled tube sheet
>
Titanium Build Plate
Gr5 / Gr23
Drawing
Metal AM build platform
>
Metal Sputtering Targets
Titanium / alloy
Drawing
PVD target blanks
Titanium Agitator Shafts
Gr2 / Gr5 / Gr7 / Gr12
Drawing
Long machined shafts
>
Related RFQ pages
Precision machined parts category
Specification detail with sources
Targets are made to the coating system rather than to a stock size. Beiyu Titanium sets the diameter or plate dimensions, the thickness and any bonding arrangement from the buyer's drawing and the equipment the target runs in, so no dimensional range is published for them here.
Two fields carry more weight on a target order than the outline does. The first is purity, stated as a purity level with the impurity limits that matter to the process and given alongside the material designation, because a generic material name on its own does not fix what the target deposits. The second is whether the target ships bonded to a backing plate, which sits on its own order line and changes both the part supplied and what the certificate covers. Beiyu Titanium supplies against EN 10204 3.1 with the reporting scope the order sets.
Request a quote for Precision Machined Metal Sputtering Targets | High Purity Custom Titanium & Alloy
Send grade, drawing or standard, dimensions, quantity, inspection scope and delivery destination. Beiyu replies with quotation, lead time and documentation scope.