Beiyu supplies seamless and welded titanium tube and pipe for heat exchangers, condensers, chemical service and industrial piping. ASTM B338 applies to condenser and heat-exchanger tube, ASTM B861 to seamless pipe and ASTM B862 to welded pipe; the ordered product form and project specification control the final scope. Send grade, outside diameter, wall thickness, length, tolerance, quantity, straight or U-bend requirement, application and destination. State hydrostatic, eddy-current, ultrasonic, cleaning, end protection and certificate requirements only when the PO requires them. Review ASTM B338 Grade 2 seamless tube, the tube grade-selection guide or Grade 9 Ti-3Al-2.5V tube for the relevant RFQ route.
Titanium Tube and Pipe products
Showing 1-10 of 10 products
1.5 Inch Titanium Tubing | Grade 2 and Grade 5 Titanium Tube1.5 inch titanium tubing for chemical equipment, marine systems, bicycle frame projects, fabrication, heat transfer components and machined tube assembliesView & RFQ >GRADE 2
Grade 2 Titanium Seamless Tube | ASTM B338 Heat Exchanger TubeGrade 2 titanium seamless tube for heat exchangers, condensers, seawater systems, chemical equipment and industrial tubing projectsView & RFQ >RFQ
Hydraulic Titanium Pipe | Seamless Titanium Tube for Hydraulic LinesHydraulic titanium pipe for corrosion-resistant fluid lines, instrument tubing, offshore equipment and chemical serviceView & RFQ >GRADE 9
Titanium Bicycle Tubing | Grade 9 Ti-3Al-2.5V Bike Frame TubeGrade 9 titanium bicycle tubing in Ti-3Al-2.5V for frame, fork, handlebar and lightweight tubular component projectsView & RFQ >RFQ
Titanium Capillary Tube | Small Diameter Titanium TubingTitanium capillary tube for small-diameter tubing assemblies, instrumentation, chemical dosing, medical-related components and precision industrial applicationsView & RFQ >RFQ
Titanium Coil Tubing | Continuous Seamless Titanium CoilTitanium coil tubing for heat exchanger coils, condenser service, desalination systems, chemical process lines and compact piping assembliesView & RFQ >GRADE 7
Grade 7 Titanium Pipe | Ti-0.15Pd Corrosion-Resistant PipeGrade 7 titanium pipe and tube in Ti-0.15Pd / UNS R52400 for corrosion-service piping, heat exchanger parts and chemical equipmentView & RFQ >GRADE 9
Grade 9 Titanium Tube | Ti-3Al-2.5V ASTM B338 / B861Grade 9 titanium tube in Ti-3Al-2.5V for applications such as bicycle frames, aerospace hydraulic lines and lightweight tubing assembliesView & RFQ >GRADE 12
Grade 12 Titanium Tube | Ti-0.3Mo-0.8Ni Seamless & Welded TubeGrade 12 titanium tube in Ti-0.3Mo-0.8Ni / UNS R53400 for chemical processing, heat-exchanger and chloride-service equipmentView & RFQ >RFQ
Titanium Welded Pipe | ASTM B862 Corrosion-Resistant Titanium PipeTitanium welded pipe for chemical processing, seawater systems, condensers, industrial piping and corrosion-resistant equipmentView & RFQ > Technical guides
Titanium tube and pipe specifications
Beiyu supplies seamless and welded titanium tube and pipe in commercially pure and alloy grades. State outside diameter, wall thickness, length, grade, standard and manufacturing route so the quotation follows the correct tube or pipe specification.
| Form | Outside diameter | Wall thickness | Length | Surface |
|---|---|---|---|---|
| Seamless tube | Ø 5-325 mm | 0.5-12 mm | ≤12000 mm | bright or pickled |
| Welded tube | Ø 6.35-1219 mm | 0.5-25.4 mm | ≤22000 mm | bright or pickled |
| Thick-wall tube | to drawing | 5-100 mm | to drawing | pickled or sandblasted |
For grade selection see the titanium tube grade selection guide, the ASTM B338 tube and pipe guide and the titanium grades comparison guide.
Send outside diameter, wall thickness, length, grade, seamless or welded route, standard and required test or document scope. MTC and EN 10204 3.1 documentation are included only when quoted and ordered.
Request a quoteHow ordering works for titanium tube and pipe
Tube and pipe minimums are confirmed after the grade, outside diameter, wall thickness, length, seamless or welded route, quantity and inspection scope are reviewed. A quoted Grade 2 program to ASME SB-338 and SB-862 used a 20 to 25 day production lead time; large diameters, tube bundles and other standards are scheduled per order. This is a quote-based reference, not a universal service level.
Wall thickness can be specified as nominal or minimum wall thickness (MWT). State the convention on the RFQ because it changes weight and price. The inspection plan can include eddy-current or hydrostatic testing when applicable to the product type and required by the ordered standard and purchase order.
- Grade 2 heat-exchanger tube is commonly ordered to ASTM B338 or ASME SB-338.
- Seamless pipe to ASTM B861, welded pipe to ASTM B862 and full tube bundles are planned by project.
- NPS and schedule 10S, 40S or 80S dimensions may be specified by agreement using the applicable dimensional table.
Material or its bundle is marked or tagged with the heat number when required by the ordered specification and purchase order, preserving the link to the applicable mill test certificate.
MOQ, stock and export scope: Minimum quantity, stock position, packing and lead time are confirmed in the quotation after the RFQ is reviewed.
Titanium Tube and Pipe RFQ questions
Which Titanium Tube and Pipe grade should be specified?
Select the grade by service medium, strength requirement, forming or machining route and any buyer drawing. Common options in this category include Gr 1/2, Gr 5, Gr 7, Gr 9.
Which standards apply to Titanium Tube and Pipe RFQs?
The purchase order should state the applicable material or project standard. Typical references for this category include ASTM B338, ASTM B861, ASTM B862, Hydrostatic test.
What information should be sent for quotation?
Send grade, standard, dimensions, tolerance, quantity, surface condition, application, destination and required documents such as MTC or EN 10204 3.1.
Request a quote for Titanium Tube and Pipe
Send grade, standard, size, tolerance, quantity, application and certificate requirements for review.