SB-265 Titanium Coil | ASME Grade 1/2 Titanium Strip Coil
ASME SB265 titanium coil and strip coil for Grade 1, Grade 2, Grade 7, Grade 12 or drawing-specified titanium sheet and strip projects. RFQs should define grade, thickness, width, coil ID/OD, edge condition, surface finish, quantity, tolerance and documentation requirements.
- Material grades: CP titanium and corrosion-service titanium grades by order specification
- Standard reference: ASME SB265 / ASTM B265 when applicable
- RFQ details: thickness, width, coil weight, surface, packing, MTC and inspection scope
- DocumentsMTC and EN 10204 3.1 on request
- TraceabilityHeat number and inspection scope confirmed
- RFQ detailsGrade, standard, size, tolerance, quantity
- PackingExport protection by product form and length
Product Introduction
ASME SB265 / ASTM B265 titanium strip and coilApplicable standard or RFQ reference
Grade, strip thickness, width, coil weight, edge and certificate requirementCore information needed for quotation
Thickness, width, coil ID/OD, edge, tolerance and surface finishDimensional review before production
MTC / EN 10204 3.1Traceability documents when required
Acceptance is by the ordered specification. Final grade, chemistry, dimensions, inspection and documentation are confirmed by the purchase specification and mill test certificate.
SB-265 Titanium Coil and Strip (ASME Grade 1 / Grade 2)
Beiyu supplies titanium coil and strip to ASME SB-265 for fabrication, heat exchanger parts, anode substrates and corrosion-resistant components. ASME SB-265 corresponds to ASTM B265 for titanium sheet, strip and plate, and is referenced when the material is used in ASME-related pressure equipment fabrication. Coil form allows continuous feeding for stamping, forming and slitting.
Titanium coil should be quoted by grade, thickness, width, coil ID and surface condition, because forming response and downstream processing depend on these parameters.
Grade and Standards
| Common grades | Commercially pure Grade 1 and Grade 2; other grades by specification |
|---|---|
| Standard reference | ASME SB-265 / ASTM B265 for titanium sheet, strip and plate |
| Condition | Annealed; cold rolled thin gauge as required |
| Forms | Coil, slit strip and cut sheet from coil |
Thickness, Width and Surface Condition
RFQs should specify grade, thickness, width, coil ID, tolerance, edge condition and surface finish. For pressure-equipment fabrication, the buyer should confirm the controlling code reference and any inspection or certificate requirement.
Common Applications
- Fabrication of titanium equipment and linings
- Heat exchanger and condenser parts
- Anode and electrochemical substrates
- Stamped and formed titanium components
Inspection and Documentation
Buyers can request mill test certificate, EN10204 3.1 documentation, heat number traceability, chemical composition and mechanical properties. Flatness, surface or dimensional inspection can be agreed when defined in the purchase specification.
Packaging and Export Information
Titanium coil is protected with edge and surface protection to prevent damage during transport, and marked by grade, thickness, width, heat number and weight where traceability is required.
RFQ Information Needed
- Grade and standard: Grade 1/2, ASME SB-265 / ASTM B265
- Thickness, width and coil ID
- Tolerance, edge condition and surface finish
- Intended forming or fabrication process
- Quantity, destination and packing
- Certificate and inspection requirements
FAQ
What is the difference between SB-265 and B265 titanium?
ASME SB-265 is the ASME adoption of ASTM B265 for titanium sheet, strip and plate; the requirements are essentially aligned and SB-265 is referenced in ASME-related fabrication.
Which grades are supplied as coil?
Commercially pure Grade 1 and Grade 2 are common; other grades can be reviewed by specification.
What is needed to quote titanium coil?
Send grade, thickness, width, coil ID, tolerance, surface condition, quantity and certificate requirements.
Procurement Notes for SB-265 Titanium Coil
SB-265 titanium coil enquiries should define grade, thickness, coil width, coil ID, coil weight, edge condition, surface finish and whether ASME SB-265 or ASTM B265 controls the order. For downstream stamping, forming or welded fabrication, buyers should also provide tolerance, flatness, burr allowance and whether slit coil or full-width coil is required.
Documentation may include mill test certificates showing chemical composition, mechanical properties, heat number and standard compliance. For chemical equipment or pressure-related applications, RFQs should mention whether EN10204 3.1 certificates, PMI testing, surface inspection photos or packing photos are needed. Thin titanium coil should be protected against edge dents, water marks and coil collapse during export packing.
Include coil handling limits, packaging preference, required certificate language and whether samples or trial coils are needed before production quantities.
Also state slit-width tolerance, edge protection method, and maximum coil outside diameter.
Coil and Strip Ordering Notes
Titanium coil orders should define thickness, width, coil ID, coil weight, edge condition, surface finish and tolerance. For stamping, forming or welding applications, the buyer should state whether annealed condition, pickled surface, slit edge, burr control or protective interleaving is required.
Thin strip and coil can be sensitive to scratches and edge damage. Export packing may include moisture protection, inner core support, outer wrapping and wooden-case packing. If multiple heats or widths are included in one order, labels should separate each coil for traceable receiving inspection.
Common applications
Review export and fabrication support22
Ti
Titanium
Stamping and formed titanium partsConfirm grade, size, tolerance, surface, packing and certificate scope before quotation.Heat exchanger strip materialConfirm grade, size, tolerance, surface, packing and certificate scope before quotation.Chemical equipment componentsConfirm grade, size, tolerance, surface, packing and certificate scope before quotation.Coil stock for downstream processingConfirm grade, size, tolerance, surface, packing and certificate scope before quotation.
What a coil order has to fix before it can be quoted
Strip and coil are ordered by a different set of fields than bar. Width, edge condition and how the coil is wound decide whether the material can run on the buyer's equipment, and none of them follow from the grade.
| Field | What it controls | Where it belongs |
|---|---|---|
| Thickness with its tolerance | Whether the strip feeds and forms as intended | Stated together, not thickness alone |
| Width and edge condition | Slit or mill edge changes downstream handling | Its own line on the order |
| Delivery condition | The metallurgical state as delivered | Stated apart from surface finish |
| Certificate scope | What arrives with the metal | Set by the order, so the order should state it |
The figures on a strip certificate have a named basis
| What is reported | Method the specification references |
|---|---|
| Oxygen and nitrogen | ASTM E1409 |
| Hydrogen | ASTM E1447 |
| Carbon | ASTM E1941 |
| Tensile properties | ASTM E8 |
Naming a method settles how a value was produced. It does not add an examination the order did not request. Beiyu supplies strip and coil with an EN 10204 3.1 mill test certificate and heat number traceability, reporting scope set by the order.
Compare related titanium strip products
Titanium strip and foil categoryProduct
Reference
RFQ focus
SB265 Titanium Coil
ASME SB265
Strip and coil stock
Grade 7 Titanium Strip
ASTM B265
Corrosion-service strip
>
Grade 1 Titanium Foil
ASTM B265
Thin titanium foil
>
Grade 5 Titanium Foil Sheet
Gr5 foil/sheet
Thin sheet alternative
>
Grade 2 Titanium Sheet
ASTM B265
Sheet alternative
>
Specification detail with sources
The Beiyu Titanium supply ranges publish titanium foil at 0.02 mm to 0.3 mm thick in widths to 600 mm supplied in coil, with cold rolled strip carried separately at 0.5 mm to 3 mm thick in widths to 1500 mm and lengths to 6000 mm. Both rows are quoted against ASTM B265 and its ASME adoption SB265.
Coil and cut length are the same material bought two ways, and the difference has to be stated, because it changes which dimensions the order needs. A coil order needs the coil inside diameter and the maximum outside diameter written in, since neither is set by the thickness or the width, and the surface condition has to be named because the supply ranges carry cold rolled bright, hot rolled acid washed, polished and sandblasted as separate finishes. A coil specified only by grade and thickness is not yet a quotable item.
A supplier comparison for this family, built from one search on one day and read from each company's own site, is at Titanium Strip Coil Suppliers: Five Company Pages Compared.
Request a quote for SB-265 Titanium Coil | ASME Grade 1/2 Titanium Strip Coil
Send grade, standard, size, condition, quantity and certificate requirements. Beiyu replies with quotation, lead time and documentation scope.
Specification for Grade 1 and Grade 2 titanium coil
All grades on this page are ordered to ASTM B265. The rows below are the grade level fields an order line needs; full chemistry is per the governing specification.
| Grade | UNS designation | Werkstoff number | Controlling standard | Selected composition limits, mass percent |
|---|---|---|---|---|
| Grade 1 commercially pure titanium | R50250 | 3.7025 | ASTM B265 | Unalloyed Ti, O 0.18 max, Fe 0.20 max |
| Grade 2 commercially pure titanium | R50400 | 3.7035 | ASTM B265 | Unalloyed Ti, O 0.25 max, Fe 0.30 max |
Minimum mechanical values are not listed here because they are set by the ordered standard for the ordered form, size range and condition. Beiyu confirms them against that standard when quoting rather than carrying them across from another product standard.
Fields that apply to every grade on this page
| Field | Value |
|---|---|
| Supply condition | R / M / Y, stated on the order |
Dimensions
State thickness, width and length with the tolerance that applies, taken from the drawing or the purchase specification.
Inspection and documentation
The inspection scope is set by the order rather than assumed. State which examinations are required, to which acceptance standard and class, and at which stage they are performed, because those four fields are what make an inspection line objectively verifiable during receiving inspection.
Acceptance criteria you can paste into your purchase order
Grade and standard: ______ to ASTM B265 (one of: Grade 1 commercially pure titanium / Grade 2 commercially pure titanium) Form and dimensions: ______ Tolerance: ______ Condition: ______ (R / M / Y, stated on the order) Surface: ______ (state a roughness value where it is an acceptance criterion) Form tolerance: ______ Inspection scope: ______ (examination, acceptance standard, class and stage) Certificate: EN 10204 3.1 inspection certificate, chemistry traceable to heat number, mechanical results and inspection lot identification per the governing specification
Send the drawing or purchase specification with those fields filled in and Beiyu reviews the enquiry against the applicable standard before pricing.