Titanium strip wound into a coil is flat product, not coiled tube and not a fabricated heat-exchanger coil. Grade and nominal thickness are only the start: slit width, edge, camber, flatness, condition, surface, coil build and protective packing often decide whether the material can run through the buyer’s line. Five company-owned pages met the rule.
How the five company sources were selected
We froze the query titanium strip coil supplier manufacturer ASTM B265 on 1 September 2026. Eligible company-owned pages expressly offered titanium flat strip or band in coil and exposed a grade, standard, rolling route, width, thickness, surface or testing field. Beiyu, geographies excluded by site policy, marketplaces, directories, third-party lists, tube-coil pages and fabricated exchanger-coil pages were removed. The order is a discovery record, not a quality or delivery ranking.
A public page can identify a likely supply route. It cannot prove the allocated lot, current schedule, final inspection result or suitability of material not yet produced or assigned. Those points remain dated quotation fields.
Company pages that met the rule
| Company source | Page role | Visible fields | RFQ check |
|---|---|---|---|
| Chalco Titanium | Coil and strip family page | ASTM B265 and other named standards; hot/cold routes; published width and surface fields | Select one grade, standard, condition, finished size, surface and coil build |
| LuminaTitan | Titanium strip page | ASTM B265/AMS labels; slit coil and sheeted-blank forms; order fields | Exclude mutable MOQ/lead-time prose and require a dated commercial return |
| Yunch Titanium | Hot/cold coil tables | ASTM/ASME B265, grades, thickness/width and condition fields | The published table contains malformed values; do not normalize them; request the offered range |
| West Titanium | Cold-rolled strip/coil page | Grade 1/2, ASTM B265, slit/coil form and application fields | Return finished tolerance, edge, camber/flatness, surface and coil packaging |
| HST Titanium | Coil and strip page | ASTM B265, grade, hot/cold route, width/thickness and test labels | The direct request returned 403; reconfirm range, condition, test and current supply |
Public width and thickness ranges do not define how a coil will feed or arrive. Quotes become comparable only when the same finished thickness/width tolerance, edge, camber/flatness, surface, weld policy, ID, OD, unit weight and protection are returned for the same grade and condition.
Specify the finished slit coil, not only B265
| Decision | Choices visible in the source set | Required written return |
|---|---|---|
| Material line | ASTM or ASME B265 grade and condition | Exact grade, edition/route and annealed or rolled condition |
| Finished section | Thickness and slit width | Values plus tolerances, measurement method and sampling |
| Shape control | Camber, flatness, coil set and telescoping | Acceptance limits for the buyer’s feed process |
| Edge and surface | Slit/mill/deburred edge; pickled, bright or other agreed finish | Edge burr limit, surface standard and defect acceptance |
| Coil build | ID, maximum OD, unit weight, winding orientation and weld policy | Packing list and coil-by-coil identification |
ASTM B265 can anchor material and flat-product requirements, but it does not by itself define a buyer’s slit-edge, coil-build or line-feed limits. Put those fields on the drawing or purchase line, and keep a wound strip coil separate from coiled tubing or a fabricated heating coil. The packing return should also state eye orientation, pallet or cradle design, interleaf, band location, moisture barrier, lifting points and whether the leading end is accessible. These handling details protect edges and help the receiving line load the coil without an improvised reorientation step.
A page conflict is a verification prompt, not a finding that a company cannot supply the item. Preserve the observed conflict, request a clean technical return and make the purchase order control the final identity, geometry, responsibility and acceptance route.
Send one controlled RFQ
| RFQ line | Buyer input | Supplier return |
|---|---|---|
| Material | Grade, B265/SB-265 basis and condition | Offered standard, grade, condition and heat/lot route |
| Dimensions | Finished thickness/width and tolerances | Committed range and inspection result |
| Edge/shape | Edge type, burr, camber, flatness and coil set | Methods, limits and sampling |
| Surface | Finish, defect acceptance, oil/paper/film limits | Final surface and protection method |
| Coil/packing | ID, OD, unit weight, winding, weld policy, orientation and moisture control | Coil map, packing drawing and marks |
| Commercial | Quantity by line, required date and destination | Current schedule, validity, documents and exceptions |
Remove any source that cannot return the exact material, deliverable, finished geometry and acceptance evidence. Compare commercial terms only after the technical lines, responsibility boundary and document scope are aligned.
Where Beiyu fits
Beiyu is outside the five-company set. Its SB-265 titanium strip-coil route asks for grade, standard, condition, thickness and width with tolerance, edge, camber/flatness, surface, coil ID/OD/unit weight, weld policy, quantity, packing and documents. Those fields are enquiry inputs, not a promise that every combination is current stock.
The fields in this section describe only Beiyu’s published enquiry route. They do not score the companies above and do not transfer to another company’s catalogue.
Related Beiyu pages
- SB-265 titanium strip coil
- Titanium sheet supplier pages compared
- Titanium coiled-tube supplier pages compared
- How to compare titanium quotations
Published by Beiyu Titanium. Beiyu is outside the five-company set. The sequence is a dated discovery snapshot after the stated exclusions, not a rating or endorsement.
Related supplier lists and supply ranges
- titanium strip and foil supply range
- Titanium Heat Exchanger Coil Suppliers
- all supplier lists by product family
Specification detail with sources
Beiyu Titanium publishes this list and is not part of the comparison above. For readers who want the publisher’s own figures on the same basis they would ask of any supplier on this page, the material is specified to ASTM B265, and each order carries an EN 10204 type 3.1 certificate with heat and pour numbers by order scope.
Beiyu supplies foil and strip 0.02 to 0.3 mm thick in widths to 600 mm, and sheet from 0.5 mm upward in widths to 1500 mm.
These are Beiyu published supply figures and inspection parameters, not limits taken from the standard; limit values belong to ASTM B265 and are confirmed against the exact edition named on the purchase order. Certification is stated as a production capability, and no stock position, delivery time or price is implied by any figure on this page.