Sintered Porous Titanium Plate

Sintered Porous Titanium Plate for Filtration and Electrochemical Equipment

Sintered porous titanium plate is produced from titanium powder or porous titanium material and is used where corrosion resistance, controlled permeability and mechanical stability are required. Beiyu supplies porous titanium plates for filtration, gas diffusion, flow distribution, electrochemical equipment and hydrogen-related applications. The key specification is not only plate size, but also pore size, porosity, permeability, thickness, cleaning requirement and operating medium.

Porous titanium products should be quoted with technical parameters instead of a general description. Buyers should state whether the plate will be used for liquid filtration, gas diffusion, PEM water electrolysis support, fuel-cell related parts, medical-related porous structures or another industrial application.

Grade and Standards

• Material: commercially pure titanium or project-specified titanium grade.
• Pore size / filtration rating: commonly discussed from fine filtration grades to larger porous structures; final range depends on production route.
• Plate size: thickness, width, length and flatness should be confirmed by drawing.
• Surface condition: as-sintered, cleaned, machined, cut-to-size or project-specified finish.

Common Applications

• Precision liquid filtration and gas filtration
• Gas diffusion and flow distribution plates
• Hydrogen production, PEM water electrolysis and fuel-cell related components
• Electrochemical equipment and corrosion-resistant process systems
• Medical-related or laboratory components where porous titanium is specified by the buyer

Procurement Notes

For filtration use, specify pore size, flow rate, pressure condition, cleaning method and target medium. For electrochemical or hydrogen-related use, provide the required porosity, thickness, contact surface, electrical requirement if any, and drawing. The same product name can refer to very different porous structures, so a drawing or technical data sheet helps avoid mismatch.

Inspection and Documentation

Inspection can include dimensional measurement, visual surface review, pore-size or permeability requirement where specified, material certificate and packing documentation. If the order requires a third-party inspection, cleanliness requirement or special test method, include it in the RFQ before production.

Packaging and Export Information

Porous titanium plates should be packed to prevent surface contamination, edge damage and bending during transportation. Thin sheets or precision-cut plates can be separated with protective material, labelled by size and packed in cartons or wooden cases according to quantity and shipment method.

RFQ Information Needed

• Material grade and product form
• Pore size, porosity or filtration rating
• Thickness, width, length, tolerance and flatness
• Application medium, temperature, pressure or flow condition
• Cleaning, inspection, documentation and packing requirements

FAQ

Can porous titanium plate be cut to drawing?
Yes. Send the drawing, thickness, pore requirement and edge condition so the cutting and packing method can be checked.

What is the most important RFQ detail?
Pore size or filtration rating is usually the first requirement, followed by plate size, thickness, porosity and application medium.

Can Beiyu quote plates for hydrogen equipment?
Yes, when the buyer provides the technical requirement, drawing and inspection scope for the specific hydrogen or electrochemical application.

Cleaning and Handling Requirements

Porous titanium can hold particles, oil or moisture inside the pore structure if handling and cleaning are not controlled. Buyers should state whether the plates need ultrasonic cleaning, drying, sealed packing, degreasing or other cleanliness requirements before shipment. For laboratory, hydrogen or electrochemical use, the cleaning method can be as important as the pore-size specification.

When porous plates are used as replacement parts, provide the original drawing, pore rating, thickness and application medium. If only a sample is available, the RFQ should include photos, measured dimensions and the expected filtration or diffusion function. This helps reduce the risk of quoting a plate with the correct outer size but unsuitable permeability.