Ti-6.5Al-3.5Mo Titanium Bar | High-Strength Titanium Alloy Bar

Ti-6.5Al-3.5Mo Titanium Bar for Controlled Alloy Requirements

Beiyu supplies Ti-6.5Al-3.5Mo titanium bar for buyers who need a titanium alloy bar controlled by drawing, material specification or project standard. This alloy should not be substituted with commercially pure titanium or common Ti-6Al-4V unless the engineering specification allows it.

For alloy bar projects, the RFQ should include the exact material designation, standard, diameter, length, heat treatment condition, mechanical property requirements and inspection scope. If the bar will be machined into load-bearing parts, drawings should identify critical dimensions and acceptance criteria.

Material, Form and Condition

Size, Tolerance and Mechanical Property Review

RFQs should specify diameter, length, tolerance, straightness, surface finish, machining allowance and quantity. When mechanical properties are critical, the buyer should provide the required tensile strength, yield strength, elongation, hardness or other acceptance criteria from the material specification.

For larger bars or forged bars, ultrasonic testing and heat treatment records may be required. These requirements should be stated before quotation because they affect material selection, processing route and inspection planning.

Common Applications

• Drawing-based titanium alloy machined components
• High-strength industrial shafts, pins, blocks and fastener blanks
• Aerospace-related parts controlled by material specification
• Forged or rolled titanium alloy bar stock for further machining
• Custom alloy components where chemistry and mechanical properties are specified

Inspection and Documentation

Buyers can request mill test certificate, EN10204 3.1 documentation, heat number traceability, chemical composition, mechanical properties and dimensional inspection. Depending on bar diameter and application, ultrasonic testing, PMI testing, hardness testing, surface inspection or third-party inspection can be specified.

Packaging and Export Information

Titanium alloy bars should be bundled, boxed or palletized according to diameter, length and surface condition. Ground or polished bars require surface protection. Labels should identify material designation, size, heat number, quantity and purchase order reference when traceability is required.

RFQ Information Needed

• Exact alloy designation and material standard
• Diameter, length, tolerance and straightness requirement
• Condition, heat treatment and required mechanical properties
• Surface condition and machining allowance
• Quantity, destination and packing requirement
• Certificate, NDT and third-party inspection requirements

FAQ

Can Ti-6.5Al-3.5Mo bar be replaced by Grade 5 titanium bar?

Only if the engineering specification allows substitution. Ti-6.5Al-3.5Mo and Grade 5 have different material designations and should be reviewed against the drawing or standard.

What information is required for quotation?

Send the alloy designation, standard, diameter, length, condition, tolerance, mechanical property requirements, quantity and inspection documents.

Can this alloy bar be supplied as a machined blank?

Machined blanks can be reviewed when the drawing includes final dimensions, machining allowance, surface finish and inspection requirements.

Procurement Notes for Ti-6.5Al-3.5Mo Bar

Ti-6.5Al-3.5Mo titanium bar RFQs should define bar diameter or section size, length, heat treatment condition, surface condition, machining allowance and applicable customer specification. This alloy is normally purchased for strength-sensitive industrial or aerospace-related components, so buyers should confirm mechanical property requirements rather than ordering by alloy name alone.

For quotation, include final part type, drawing tolerance, quantity per size, required test reports and whether ultrasonic inspection, PMI or EN10204 3.1 certificates are needed. If the bar will be machined into shafts, pins, fastener blanks or structural parts, note critical dimensions and surface finish expectations before pricing.