Grade 12 Titanium Plate | ASTM B265 Ti-0.3Mo-0.8Ni Plate
Grade 12 titanium plate for chemical equipment, seawater systems, heat exchangers, pressure-related fabrication and corrosion-resistant industrial parts. RFQs should specify ASTM B265 Grade 12, thickness, width, length, tolerance, surface condition, inspection and certificate requirements.
- Material: Grade 12 titanium / UNS R53400 / Ti-0.3Mo-0.8Ni
- Common standard: ASTM B265 / ASME SB265 for titanium plate and sheet
- RFQ details: thickness, plate size, surface, tolerance, NDT and documentation
- DocumentsMTC and EN 10204 3.1 on request
- TraceabilityHeat number and inspection scope confirmed
- RFQ detailsGrade, standard, size, tolerance, quantity
- PackingExport protection by product form and length
Product Introduction
ASTM B265 Grade 12 titanium plate / Ti-0.3Mo-0.8NiApplicable standard or RFQ reference
Grade 12, ASTM B265, plate size, medium, condition and inspection scopeCore information needed for quotation
Thickness, width, length, flatness, cutting allowance and toleranceDimensional review before production
MTC / EN 10204 3.1Traceability documents when required
Acceptance is by the ordered specification. Final grade, chemistry, dimensions, inspection and documentation are confirmed by the purchase specification and mill test certificate.
Grade 12 Titanium Plate for Corrosion-Resistant Fabrication
Beiyu supplies Grade 12 titanium plate for chemical equipment, heat exchangers, seawater service, pressure-related fabrication, electrochemical equipment and industrial corrosion-resistant components. Grade 12 is a titanium alloy containing nickel and molybdenum, often specified when the application requires stronger corrosion performance than commercially pure grades in selected environments.
Grade 12 plate should be quoted according to ASTM B265, ASME SB265 or the buyer's project specification. The RFQ should define thickness, plate size, surface condition, tolerance, inspection scope and whether cutting, machining or forming is required.
Grade and Standard
| Material grade | Grade 12 titanium, UNS R53400, commonly described as Ti-0.3Mo-0.8Ni. |
|---|---|
| Common standard | ASTM B265 / ASME SB265 for titanium and titanium alloy strip, sheet and plate. |
| Condition | Annealed plate or project-specified condition according to thickness and order requirement. |
| Surface condition | Pickled, blasted, hot rolled, cold rolled or polished surface depending on thickness and use. |
Thickness, Size and Fabrication Requirements
RFQs should specify thickness, width, length, tolerance, flatness, surface finish, edge condition and quantity. If the plate will be used for equipment fabrication, the drawing should show cut shapes, holes, bending, welding, machining allowance and any pressure-related requirements.
For thick plates or critical service, buyers should confirm ultrasonic testing, PMI testing, third-party inspection and certificate format before order confirmation. For welded equipment, the related welding plan and filler material requirement should also be considered.
Common Applications
- Chemical processing equipment and corrosion-resistant vessels
- Seawater, brine and desalination equipment
- Heat exchanger plates, covers, baffles and tube sheets
- Electrochemical and hydrometallurgy equipment
- Custom cut or machined Grade 12 titanium plate components
Inspection and Documentation
Buyers can request mill test certificate, EN10204 3.1 documentation, heat number traceability, chemical composition, mechanical properties and dimensional inspection. Additional PMI testing, ultrasonic testing, flatness inspection or third-party inspection can be added when required by the project.
Packaging and Export Information
Grade 12 titanium plate should be protected from scratches, edge damage and mixed-material contamination. Plates may be packed with separation paper, protective film, pallets or wooden cases depending on size and surface condition. Labels should identify grade, standard, plate size, quantity and heat number when traceability is required.
RFQ Information Needed
- Grade and standard: ASTM B265 Grade 12 or project specification
- Thickness, width, length, tolerance and flatness requirement
- Surface condition and edge condition
- Cutting, machining, drilling or forming requirement
- Quantity, destination and packing requirement
- Certificate, NDT and third-party inspection requirements
FAQ
What is Grade 12 titanium plate?
Grade 12 is a titanium alloy with nickel and molybdenum additions. It is commonly considered for corrosion-resistant industrial applications where the project specification calls for Grade 12.
Which standard is used for Grade 12 titanium plate?
ASTM B265 / ASME SB265 is commonly used for titanium and titanium alloy sheet and plate, including Grade 12 when specified.
What should be included in a Grade 12 plate RFQ?
Send grade, standard, thickness, width, length, tolerance, surface condition, quantity, certificate requirements and any cutting or inspection requirements.
Procurement Notes for Grade 12 Titanium Plate
Grade 12 titanium plate RFQs should define ASTM B265, UNS R53400, thickness, width, length, quantity, surface condition and whether the order requires full plates, cut pieces or machined blanks. Buyers often select Grade 12 for chemical processing, heat exchangers, chloride service and industrial equipment where Ti-0.3Mo-0.8Ni corrosion performance is required.
Useful purchasing details include tolerance, flatness, edge trimming, machining allowance, protective film and inspection requirements. Documentation may include mill test certificates, chemical composition, mechanical properties, heat number traceability, EN10204 3.1, PMI or ultrasonic inspection when specified. Packing should protect plate surfaces and edges during export transit.
Common applications
Review export and fabrication support22
Ti
Titanium
Chemical corrosion-service platesConfirm grade, size, tolerance, surface, inspection and certificate scope before quotation.Heat exchanger and vessel partsConfirm grade, size, tolerance, surface, inspection and certificate scope before quotation.Crevice-corrosion-prone equipmentConfirm grade, size, tolerance, surface, inspection and certificate scope before quotation.Grade 12 cut plate procurementConfirm grade, size, tolerance, surface, inspection and certificate scope before quotation.
Compare related titanium products
Titanium Sheet and PlateProduct
Reference
RFQ focus
Grade 2 Titanium Sheet
ASTM B265
Commercially pure sheet
>
ASME SB265 Grade 2 Plate
ASME SB265
Pressure-equipment plate
>
Grade 7 Titanium Sheet
ASTM B265
Pd-alloy corrosion sheet
>
Grade 12 Titanium Plate
ASTM B265
Mo-Ni corrosion plate
Grade 4 Titanium Sheet
ASTM B265
Higher-strength CP sheet
>
Beta Titanium Alloy Sheet
Beta alloy
Drawing-based sheet
>
Ti-15-3-3-3 Sheet
Beta alloy
High-strength beta sheet
>
Titanium Cathode Plate
Grade 1 / 2
Electrowinning plate
>
For a view of who else publishes this material and what each one states, see Grade 12 Titanium Plate Suppliers: Five Company Pages Compared.
Request a quote for Grade 12 Titanium Plate | ASTM B265 Ti-0.3Mo-0.8Ni Plate
Send grade, standard, size, condition, quantity and certificate requirements. Beiyu replies with quotation, lead time and documentation scope.
Specification detail with sources
ASTM B265-25 identifies Grade 12 as titanium alloyed with 0.2 to 0.4 percent molybdenum and 0.6 to 0.9 percent nickel. Those additions are used for improved crevice-corrosion resistance in hot chloride and brine service, but the grade selection still depends on the medium, temperature, crevices and design basis; Grade 12 is not a blanket substitute for a palladium-bearing or unalloyed grade.
Beiyu quotes Grade 12 plate in its 3 to 70 mm heavy rolling band, at widths to 2500 mm and lengths to 6000 mm. That production envelope is not a stock statement. Third-party inspection is arranged only when the purchase order names it, with the examination, acceptance standard, class, stage and any witness or hold points agreed before production begins.
Specification for Grade 12 Ti-0.3Mo-0.8Ni plate and sheet
These are the fields an order line needs. Minimum values shown are those of ASTM B265 in the annealed condition. Where the order calls for another condition, the figures come from that row of the standard instead.
| Field | Value |
|---|---|
| Grade | Grade 12 Ti-0.3Mo-0.8Ni |
| UNS designation | R53400 under ASTM B265 |
| Werkstoff number | 3.7105 |
| Controlling standard | ASTM B265 |
| Selected composition limits, mass percent | Ti-0.3Mo-0.8Ni (Mo 0.2 to 0.4, Ni 0.6 to 0.9). Full chemistry is per the governing specification. |
| Minimum tensile strength | 483 MPa (70 ksi) |
| Minimum yield strength | 345 MPa (50 ksi) |
| Minimum elongation | 18%, measured in 2 in or 50 mm |
| Supply condition | R / M / Y, stated on the order |
Supply envelope
| Form | Range |
|---|---|
| Thin plate and sheet | 0.5 mm to 3 mm thick, width to 1500 mm |
| Plate | 3 mm to 70 mm thick, width to 2500 mm, length to 6000 mm |
The envelope above is the production capability. It does not mean every combination of grade, condition, surface, tolerance and inspection is available across the whole range, and it is not a stock statement. The ordered combination is confirmed at quotation.
Inspection and documentation
The inspection scope is set by the order rather than assumed. State which examinations are required, to which acceptance standard and class, and at which stage they are performed, because those four fields are what make an inspection line objectively verifiable during receiving inspection.
Acceptance criteria you can paste into your purchase order
Grade and standard: Grade 12 Ti-0.3Mo-0.8Ni, ASTM B265, UNS R53400 Form and dimensions: ______ Tolerance: ______ Condition: ______ (R / M / Y, stated on the order) Surface: ______ (state a roughness value where it is an acceptance criterion) Flatness: ______ Inspection scope: ______ (examination, acceptance standard, class and stage) Certificate: EN 10204 3.1 inspection certificate, chemistry traceable to heat number, mechanical results and inspection lot identification per the governing specification
Send the drawing or purchase specification with those fields filled in and the enquiry is reviewed against the applicable standard before pricing.