Inconel 600 Plate | UNS N06600 Nickel Alloy Plate
Inconel 600 plate in UNS N06600 / Alloy 600 for heat-resistant and corrosion-service equipment. RFQs should specify ASTM B168 or project standard, thickness, width, length, condition, surface finish, quantity, MTC, EN 10204 3.1 and inspection requirements.
- DocumentsMTC and EN 10204 3.1 on request
- TraceabilityHeat number and inspection scope confirmed
- RFQ detailsGrade, standard, size, tolerance, quantity
- PackingExport protection by product form and length
Product Introduction
UNS N06600Inconel 600 designation
ASTM B168Plate and sheet reference
Ni-Cr alloyOxidation and heat-service use
MTC / 3.1Documents on request
Acceptance is by the ordered specification. Values are RFQ references only. Final grade, chemistry, dimensions, inspection and documentation are confirmed by the purchase specification and mill test certificate.
Inconel 600 Plate for Heat and Corrosion-Service Equipment
Inconel 600 plate, also known as Alloy 600 / UNS N06600, is a nickel-chromium alloy plate used for heat-resistant components, chemical process equipment, furnace parts and corrosion-service fabrication. The material is normally quoted by standard, thickness, width, length, condition and inspection requirement.
For industrial purchasing, define whether the plate is ordered to ASTM B168, ASME SB168 or a project drawing. If the plate will be cut, formed or welded, include dimensional tolerance, flatness, surface condition and any additional testing requirement.
Grade and Standards
| Material | Inconel 600 / Alloy 600 / UNS N06600 |
|---|---|
| Common standard | ASTM B168 / ASME SB168 when specified |
| Form | Plate, sheet, cut plate, strip or drawing-based blank |
| Condition | Annealed or ordered condition according to the specification |
| Documents | MTC, heat traceability and EN 10204 3.1 when requested |
Inspection and Processing Considerations
- Thickness, width, length, flatness and surface inspection
- Chemical composition and mechanical property reporting by heat number
- PMI, ultrasonic testing or third-party inspection when required by the project
- Protective packing for cut plates and export shipments
Packaging and Export Information
Inconel 600 plate should be packed according to thickness, surface condition and transport method. Typical export packing includes surface protection, edge protection, plate separation, moisture protection, heat-number marking and wooden case or pallet packing when required by the order.
Common Applications
Heat treatment and furnace equipment
Chemical processing and corrosion-service fabrication
Thermal shields, baffles and high-temperature fixtures
Nickel alloy plate components machined or formed from flat stock
RFQ Checklist
- Alloy 600 / UNS N06600
- ASTM B168, ASME SB168 or project drawing
- Thickness, width, length, tolerance and quantity
- Condition, surface finish, cutting requirement and packing method
- MTC, EN 10204 3.1, PMI, UT or third-party inspection scope
FAQ
Is Inconel 600 the same as UNS N06600?
UNS N06600 is the UNS designation for Alloy 600, commonly called Inconel 600 in the market.
Can the plate be cut to drawing size?
Cut-to-size plate can be quoted when the required dimensions, tolerance, edge condition, quantity and documentation requirements are provided.
Compare nickel and nickel alloy products
Nickel alloy category| Product | Material | Reference | Best for | Link |
|---|---|---|---|---|
| Nickel 200 Seamless Pipe | UNS N02200 | ASTM B161 | Pure nickel pipe for caustic service | View |
| Nickel 200 / 201 Tube | UNS N02200 / N02201 | ASTM / ASME | Pure nickel tube RFQs | View |
| Nickel Alloy Pipe and Tube | 625 / C276 / 825 / 800H | Project standard | Multi-alloy pipe and tube RFQs | View |
| Alloy 825 Tubing | UNS N08825 | ASTM / ASME | Acid and chloride-service tubing | View |
| Inconel 625 Plate | UNS N06625 | ASTM B443 | Ni-Cr-Mo corrosion-service plate | View |
| Inconel 600 Plate | UNS N06600 | ASTM B168 | Heat and oxidation-service plate | Current page |
| Inconel 718 Bar | UNS N07718 | ASTM B637 | High-strength bar and machined parts | View |
Related nickel alloy products
Nickel alloy category
Specification detail with sources
The Beiyu Titanium supply ranges publish nickel alloy plate at 3.0 mm to 70 mm thick in widths to 2500 mm and lengths to 6000 mm, with sheet carried separately at 0.8 mm to 3.0 mm thick in widths to 1200 mm. Inconel 600 sits in those ranges under the UNS designation N06600.
The 3.0 mm figure is where sheet ends and plate begins in those ranges, and the width ceiling changes at the same point: 1200 mm on the sheet row against 2500 mm on the plate row. A drawing calling for 3 mm material is on the boundary and should say which of the two it is being bought as, because the product specification that the certificate reports against follows the form rather than the alloy.
For a view of who else publishes this material and what each one states, see Inconel 600 Plate Suppliers: Five Company Pages Compared.
Request a quote for Inconel 600 Plate | UNS N06600 Nickel Alloy Plate
Send alloy grade, standard, size, condition, quantity and certificate requirements. Beiyu replies with quotation, lead time and documentation scope.