Grade 2 Titanium Sheet | ASTM B265 Titanium Plate and Sheet
Grade 2 titanium sheet and plate for chemical equipment, heat exchangers, anodes, cathodes, marine components and fabricated titanium parts. RFQs can specify ASTM B265 Grade 2, thickness, width, length, surface finish, tolerance, inspection and certificate package.
- Material: Grade 2 commercially pure titanium / UNS R50400
- Common standard: ASTM B265 / ASME SB265
- RFQ details: thickness, width, length, surface, quantity and documentation
- DocumentsMTC and EN 10204 3.1 on request
- TraceabilityHeat number and inspection scope confirmed
- RFQ detailsGrade, standard, size, tolerance, quantity
- PackingExport protection by product form and length
Product Introduction
ASTM B265 Grade 2 titanium sheet and plateApplicable standard or RFQ reference
Grade 2, ASTM B265, thickness, width, length, surface and certificate scopeCore information needed for quotation
Thickness, width, length, flatness, tolerance and cut-to-size needDimensional review before production
MTC / EN 10204 3.1Traceability documents when required
Acceptance is by the ordered specification. Final grade, chemistry, dimensions, inspection and documentation are confirmed by the purchase specification and mill test certificate.
Grade 2 Titanium Sheet for Fabrication and Corrosion-Resistant Equipment
Beiyu supplies Grade 2 titanium sheet and plate for chemical processing equipment, heat exchangers, titanium anodes, cathodes, marine components, medical-related parts and general industrial fabrication. Grade 2 is a commercially pure titanium grade selected for corrosion resistance, weldability and moderate strength.
Grade 2 sheet is often used when the material will be cut, formed, welded or fabricated into corrosion-resistant parts. Buyers should confirm whether the material is for flat sheet supply, plate cutting, bending, welding, stamping or equipment fabrication.
Grade and Standard
| Material grade | Grade 2 commercially pure titanium, UNS R50400. |
|---|---|
| Common standard | ASTM B265 / ASME SB265 for titanium sheet, strip and plate. |
| Common condition | Annealed sheet or plate, with condition confirmed by thickness and order requirement. |
| Surface options | Pickled, blasted, polished, cold rolled or hot rolled surface depending on thickness and application. |
Thickness, Size and Surface Finish
RFQs should specify thickness, width, length, tolerance, surface finish, quantity and whether the material is required as sheet, plate, strip or cut pieces. Flatness and surface requirements should be stated when the sheet will be used for precision fabrication or visible surfaces.
For equipment manufacturing, drawings or fabrication notes help confirm whether Grade 2 sheet will be welded, formed, drilled, laser cut or machined. If the material is used in pressure equipment or chemical service, inspection and documentation requirements should be confirmed before production or procurement.
Common Applications
- Chemical equipment liners, covers, baffles and shell parts
- Heat exchanger plates and fabricated titanium components
- Titanium anodes, cathodes and electrochemical equipment parts
- Marine and seawater corrosion-resistant sheet components
- Medical-related and industrial parts made by cutting or forming
Inspection and Documentation
Buyers can request mill test certificate, EN10204 3.1 documentation, heat number traceability, chemical composition, mechanical properties and dimensional inspection. Depending on thickness and service condition, ultrasonic testing, PMI testing, flatness inspection or third-party inspection can be added to the purchase specification.
Packaging and Export Information
Titanium sheet should be protected from scratches, moisture and mixed-material contamination during packing. Sheets and plates may be packed with protective film, paper separation, pallets or wooden cases according to size, surface condition and shipment method. Packing labels should show grade, standard, size, quantity and heat number when required.
RFQ Information Needed
- Grade and standard: for example ASTM B265 Grade 2
- Thickness, width, length, tolerance and flatness requirement
- Surface finish and edge condition
- Quantity and destination
- Certificate, inspection and third-party documentation requirements
- Drawing or use case if cutting, welding or forming is required
FAQ
What is the difference between titanium sheet and titanium plate?
The distinction is usually based on thickness and project terminology. Buyers should specify exact thickness, width, length, tolerance and standard rather than relying only on the words sheet or plate.
Is Grade 2 titanium sheet suitable for welding?
Grade 2 titanium is commonly selected for welded corrosion-resistant equipment, but welding procedure, shielding gas control and cleanliness should be managed according to the project requirement.
What documents are usually requested with ASTM B265 sheet?
Buyers commonly request mill test certificate, EN10204 3.1, chemical composition, mechanical properties and dimensional inspection. Additional PMI or third-party inspection can be specified in the RFQ.
Related Sheet and Plate Materials
If your project also needs different thicknesses or alloy grades, compare our titanium sheet and plate materials before confirming cut size, surface condition and documentation requirements.
Common applications
Review export and fabrication support22
Ti
Titanium
Chemical equipment sheet partsConfirm grade, size, tolerance, surface, inspection and certificate scope before quotation.Heat exchanger platesConfirm grade, size, tolerance, surface, inspection and certificate scope before quotation.Seawater corrosion-service panelsConfirm grade, size, tolerance, surface, inspection and certificate scope before quotation.Commercially pure titanium sheet RFQsConfirm grade, size, tolerance, surface, inspection and certificate scope before quotation.
Compare related titanium products
Titanium Sheet and Plate| Product | Reference | RFQ focus | Link |
|---|---|---|---|
| Grade 2 Titanium Sheet | ASTM B265 | Commercially pure sheet | Current page |
| ASME SB265 Grade 2 Plate | ASME SB265 | Pressure-equipment plate | Current page |
| Grade 7 Titanium Sheet | ASTM B265 | Pd-alloy corrosion sheet | View |
| Grade 12 Titanium Plate | ASTM B265 | Mo-Ni corrosion plate | View |
| Grade 4 Titanium Sheet | ASTM B265 | Higher-strength CP sheet | View |
| Beta Titanium Alloy Sheet | Beta alloy | Drawing-based sheet | View |
| Ti-15-3-3-3 Sheet | Beta alloy | High-strength beta sheet | View |
| Titanium Cathode Plate | Grade 1 / 2 | Electrowinning plate | View |
For a view of who else publishes this material and what each one states, see Grade 2 Titanium Sheet Suppliers: Five Company Pages Compared.
Request a quote for Grade 2 Titanium Sheet | ASTM B265 Titanium Plate and Sheet
Send grade, standard, size, condition, quantity and certificate requirements. Beiyu replies with quotation, lead time and documentation scope.
Beiyu Titanium reviews ASTM B265 titanium sheet and plate RFQs from thin sheet through heavy plate in Grade 2 (UNS R50400) and Grade 5 (Ti-6Al-4V, UNS R56400). EN 10204 3.1 mill test certificates and heat-number traceability are supplied when included in the quotation and purchase order. Grade 2 is commonly selected for corrosion-service and welded fabrication; Grade 5 is commonly selected for higher-strength machined and structural applications, subject to the design and ordered specification. Export orders are contracted through Jiaxing Beiyu New Materials Technology Co., Ltd., with production-side resources at the Beiyu titanium mill in Baoji, Shaanxi.
Grade and form options for titanium sheet and plate
| Grade | UNS | ASTM Min UTS / YS | Form | Typical use |
|---|---|---|---|---|
| Grade 1 | R50250 | 240 / 138 MPa (35 / 20 ksi) | sheet | Deep-formed parts, linings, anode substrates |
| Grade 2 | R50400 | 345 / 275 MPa (50 / 40 ksi) | sheet and plate | Heat exchangers, chemical equipment, welded fabrication |
| Grade 5 | R56400 | 895 / 828 MPa (130 / 120 ksi) | sheet and plate | High-strength machined and structural plate |
| Grade 7 | R52400 | 345 / 275 MPa (50 / 40 ksi) | plate | Reducing-acid and crevice-corrosion service |
| Grade 12 | R53400 | 483 / 345 MPa (70 / 50 ksi) | plate | Hot chloride and brine service |
| Grade 23 | R56407 (B265); R56401 (F136) | 828 / 759 MPa (120 / 110 ksi) | sheet and plate | Medical-related parts to ASTM F136 |
Values shown are ASTM B265 room-temperature minimums. Ordered properties, inspection-document type and heat or lot traceability are confirmed in the quotation and purchase order.
Titanium plate for sale: grades, thickness and certification
Beiyu Titanium supplies titanium plate to ASTM B265 in Grade 2, Grade 5 and Grade 7, cut to the thickness, width and length your project requires. Plate price depends on grade, thickness, quantity and surface condition, so send those details for a quotation. As a manufacturer-backed export supplier, Beiyu asks buyers to state the required MTC, EN 10204 3.1 and heat-number traceability scope in the RFQ; final document scope is confirmed in the quotation and purchase order.
Grade 5 (Ti-6Al-4V) titanium sheet and plate
Grade 5 titanium sheet and plate (UNS R56400) offers roughly 895 MPa minimum tensile strength for machined and structural parts where Grade 2 is not strong enough. Beiyu Titanium supplies Grade 5 to ASTM B265 and AMS 4911 where the drawing requires aerospace flat product, with surface, flatness and tolerance reviewed before quotation.
Specification detail with sources
Grade 2 titanium sheet is controlled by ASTM B265 as much through chemistry as through strength: oxygen is capped at 0.25 percent and iron at 0.30 percent, the chemistry window that separates the grade from stronger CP variants. The same specification requires a minimum elongation of 20 percent for annealed flat product, and that reserve of ductility is what fabricators rely on when Grade 2 sheet is bent, dished or deep formed.
Beiyu Titanium splits Grade 2 sheet into two rolling programs at 3 mm: the thinner program runs to 1500 mm width, while plate above 3 mm runs to 2500 mm width. In Beiyu's supply practice the two programs are quoted separately, because flatness behavior and the available surface preparation differ between the cold and hot rolling routes. Beiyu asks buyers whose Grade 2 order sits near the 3 mm break to state tolerance expectations at enquiry stage.
Specification for Grade 2 commercially pure titanium sheet and plate
These are the fields an order line needs. Minimum values shown are those of ASTM B265 in the annealed condition. Where the order calls for another condition, the figures come from that row of the standard instead.
| Field | Value |
|---|---|
| Grade | Grade 2 commercially pure titanium |
| UNS designation | R50400 under ASTM B265 |
| Werkstoff number | 3.7035 |
| Controlling standard | ASTM B265 |
| Selected composition limits, mass percent | Unalloyed Ti, O 0.25 max, Fe 0.30 max. Full chemistry is per the governing specification. |
| Minimum tensile strength | 345 MPa (50 ksi) |
| Minimum yield strength | 275 MPa (40 ksi) |
| Minimum elongation | 20%, measured in 2 in or 50 mm |
| Supply condition | R / M / Y, stated on the order |
Supply envelope
| Form | Range |
|---|---|
| Thin plate and sheet | 0.5 mm to 3 mm thick, width to 1500 mm |
| Plate | 3 mm to 70 mm thick, width to 2500 mm, length to 6000 mm |
The envelope above is the production capability. It does not mean every combination of grade, condition, surface, tolerance and inspection is available across the whole range, and it is not a stock statement. The ordered combination is confirmed at quotation.
Inspection and documentation
The inspection scope is set by the order rather than assumed. State which examinations are required, to which acceptance standard and class, and at which stage they are performed, because those four fields are what make an inspection line objectively verifiable during receiving inspection.
Acceptance criteria you can paste into your purchase order
Grade and standard: Grade 2 commercially pure titanium, ASTM B265, UNS R50400 Form and dimensions: ______ Tolerance: ______ Condition: ______ (R / M / Y, stated on the order) Surface: ______ (state a roughness value where it is an acceptance criterion) Flatness: ______ Inspection scope: ______ (examination, acceptance standard, class and stage) Certificate: EN 10204 3.1 inspection certificate, chemistry traceable to heat number, mechanical results and inspection lot identification per the governing specification
Send the drawing or purchase specification with those fields filled in and the enquiry is reviewed against the applicable standard before pricing.