Beiyu supplies titanium and titanium alloy materials for overseas buyers who need traceable stock for machining, fabrication, corrosion-resistant equipment and project procurement. The titanium range includes bar, sheet, plate, tube, pipe, wire, billet, forgings, anodes, porous titanium materials, clad titanium and drawing-based components. Common commercial and alloy grades include Grade 1, Grade 2, Grade 5, Grade 7, Grade 9 and Grade 12, depending on strength, corrosion service, forming requirements and final application.RFQs should specify grade, ASTM or AMS standard, size range, tolerance, surface condition, quantity and documentation requirement. For project orders, drawings, service medium, operating temperature, inspection scope and packing method help confirm the correct material route before quotation. Common documents may include mill test certificate, heat number traceability, chemical composition, mechanical properties and packing photos when requested by the buyer.
The document set is also where a second question lands. Ordering to ASTM and AMS together covers what an order has to carry when it names both specification systems at once.
Specification detail with sources
The titanium ranges quoted across this category come from the Beiyu Titanium supply ranges rather than from any one product page. Those ranges put round bar at 1 mm to 500 mm in diameter with length to 6000 mm, thin plate and sheet at 0.5 mm to 3 mm thick in widths to 1500 mm, plate at 3 mm to 70 mm thick in widths to 2500 mm, seamless tube at outside diameter 5 mm to 325 mm with wall 0.5 mm to 12 mm, and forged bar at Ø50 mm to 500 mm with length to 3000 mm. Welded tube, capillary tube and the machined forms carry envelopes of their own, stated on their own pages rather than here.
The standards sit beside them rather than inside them. Bar and billet are quoted against ASTM B348, flat product against ASTM B265, tube and pipe against ASTM B338, B861 and B862, and forgings against ASTM B381, each with its ASME SB adoption, SB348, SB265, SB338 with SB861 and SB862, and SB381 respectively. Which of them a certificate reports against is named on the order, and mill test certification to EN 10204 3.1 carries the heat number through to that report.
Titanium products
Showing 49-56 of 56 products
Grade 12 Titanium Tube | Ti-0.3Mo-0.8Ni Seamless & Welded TubeGrade 12 titanium tube in Ti-0.3Mo-0.8Ni / UNS R53400 for chemical processing, heat-exchanger and chloride-service equipmentView & RFQ >WELDED
Titanium Welded Pipe | ASTM B862 Corrosion-Resistant Titanium PipeTitanium welded pipe for chemical processing, seawater systems, condensers, industrial piping and corrosion-resistant equipmentView & RFQ >GRADE 23
6Al4V ELI Titanium Wire | Grade 23 Ti-6Al-4V ELI Wire6Al4V ELI titanium wire for medical-related components, aerospace-related parts, springs, pins, fasteners and precision industrial wire applicationsView & RFQ >GRADE 7
ERTi-7 Titanium Welding Wire | AWS A5.16 Grade 7 Filler WireERTi-7 titanium welding wire for welding Grade 7 titanium and corrosion-resistant titanium assemblies used in chemical processing, seawater, brine and equipment fabricationView & RFQ >WELDING WIRE
Thermal Spray Titanium Wire | Titanium Wire for Coating ApplicationsThermal spray titanium wire for coating, surface engineering and corrosion-resistant metallizing applicationsView & RFQ >WIRE
Thin Titanium Wire | Small Diameter Titanium WireThin titanium wire for small-diameter industrial wire applications, mesh, springs, medical-related components, electrochemical parts and precision assembliesView & RFQ >WELDING WIRE
Titanium MIG Welding Wire | AWS A5.16 ERTi Spool WireTitanium MIG welding wire for automated or semi-automatic welding of titanium and titanium alloy componentsView & RFQ >WELDING WIRE
Titanium TIG Welding Wire | AWS A5.16 ERTi Straight RodsTitanium TIG welding wire and straight filler rods for welding titanium sheet, plate, tube, pipe fittings, flanges and fabricated equipmentView & RFQ > Technical guides
Ordering and supply overview by product form
| Form | Quantity basis | Schedule basis | Available certificate or inspection scope |
|---|---|---|---|
| Bar | Confirmed by grade, size, condition and documents | Industrial and precision ground routes are scheduled separately | MTC, EN 10204 3.1 and UT when included in the ordered standard and PO |
| Sheet / plate | Confirmed by grade, thickness, width, quantity and documents | Wide material is scheduled separately from standard widths | MTC and EN 10204 3.1 by ordered specification and PO |
| Tube / pipe | Confirmed by OD, wall, length, route, quantity and inspection | Seamless and welded routes are scheduled separately | MTC, EN 10204 3.1 and applicable NDT by ordered specification and PO |
| Forgings | Confirmed from drawing, input weight, piece count and inspection | Confirmed at quotation | MTC, EN 10204 3.1 and UT report when ordered |
| Wire | Confirmed by grade, diameter, condition, packing and documents | Confirmed at quotation | MTC and EN 10204 3.1 by ordered specification and PO |
| Strip / foil / coil | Confirmed by grade, thickness, width, packing and documents | A custom-melt route is scheduled from order release rather than from enquiry | COC and EN 10204 3.1 MTC with heat or lot traceability by ordered specification and PO |
This table gives the basis on which quantity and schedule are worked out, not a quantity or a schedule. Every order is confirmed against grade, standard, dimensions, quantity, inspection, documents and the current production schedule. Stock positions and export packing are confirmed case by case.
Titanium RFQ questions
Which Titanium grade should be specified?
Select the grade by service medium, strength requirement, forming or machining route and any buyer drawing. Common options in this category include Gr 1/2 CP, Gr 5 Ti-6Al-4V, Gr 7 Ti-0.15Pd, Gr 9 Ti-3Al-2.5V.
Which standards apply to Titanium RFQs?
The purchase order should state the applicable material or project standard. Typical references for this category include ASTM B265, ASTM B348, ASTM B338, ASTM B863.
What information should be sent for quotation?
Send grade, standard, dimensions, tolerance, quantity, surface condition, application, destination and required documents such as MTC or EN 10204 3.1.
Request a quote for Titanium
Send grade, standard, size, tolerance, quantity, application and certificate requirements for review.