Standards

AMS 4911 is the aerospace material specification for annealed Ti-6Al-4V (Grade 5) titanium sheet, strip and plate, with a composition similar to UNS R56400. It covers flat product up through 4.000 inches (101.60 mm) thick, fixes the annealed condition and mechanical properties, and adds aerospace-level testing such as ultrasonic inspection of plate. Ordering flat product […]

When a drawing calls out an ASTM standard, order it to the commercial specification for that form: standard, grade, form, size, condition and EN 10204 3.1 certificate belong on the same line of your RFQ. When a drawing calls out AMS, the part is aerospace-grade: it needs a defined heat-treat condition, tighter inspection, and traceability

ASTM B381 is a material specification for titanium and titanium-alloy forgings. It defines covered grades and their chemical and mechanical requirements for products such as discs, rings, blocks and drawing-based forged parts. A complete forging RFQ also needs the grade, condition, drawing, dimensions, machining allowance, inspection scope and document requirements. Grade 12 weld neck flange

ASTM B338 is the standard specification for seamless and welded titanium and titanium alloy tubes used in condensers and heat exchangers. It is a tube standard, not a pipe standard. Titanium pipe is normally specified to ASTM B861 for seamless pipe or ASTM B862 for welded pipe. What ASTM B338 covers Beiyu Titanium supplies ASTM

ASTM B348 is the standard specification for titanium and titanium alloy bars and billets. It defines grade chemistry, mechanical properties and bar or billet condition. A complete ASTM B348 enquiry should state grade, diameter or section size, length, tolerance, condition, surface finish and certificate requirement. What ASTM B348 covers Beiyu Titanium is the international titanium

ASTM B265 is the standard specification for titanium and titanium alloy strip, sheet and plate. It defines grade chemistry, mechanical properties, thickness range and flat-product requirements. A useful ASTM B265 enquiry should state grade, thickness, width, length, tolerance, surface condition and certificate requirement. What ASTM B265 covers ASTM B265 applies to titanium strip, sheet and

A titanium mill test certificate (MTC) records the inspection and test information required for the delivered material by the purchase order and product specification. The RFQ should state the required inspection document type. EN 10204 type 3.1 is a common option when the order calls for specific inspection results validated by the manufacturer’s authorised inspection